I-Beam
See the installation instructions for complete guidelines on mounting the fan to an I-beam.
Install Guidelines
- Big Ass Fans does not recommend mounting the fan to a fabricated I-beam.
- The I-Beam Adapter Kit must be purchased to hang the fan from an I-beam.
- Do not install the fan from a single purlin, truss, or bar joist.
- The installer must supply angle irons and suitable 1/2-13 or M12 Grade 8 mounting hardware.
- The I-beam flange width must be between 5 in. (127 mm) and 9-7/8 in. (250 mm).
- Do not use beam clips on angle irons.
- See callouts in the interactive model for additional guidelines.