My es6 fan is wobbling during operation. | Big Ass Fans

My es6 fan is wobbling during operation.

  • Verify that the outlet box or mounting structure is suitable for fan support. For outlet box installations, we recommend a standard UL-listed, fan-rated outlet box be used and installed onto a beam or joist. The outlet box should be marked acceptable for fan support. Most outlet boxes commonly used for hanging light fixtures are not rated for fan support and may need to be replaced.
  • Make sure the airfoil screws are securely tightened. Tighten the six airfoil screws on the bottom of the fan according to the numbered sequence. When finished, repeat the tightening sequence.
  • Make sure all mounting hardware is secure and tight.
  • If an airfoil is damaged, contact Customer Service. Airfoils must be replaced as a set. Do not replace individual airfoils.
  • Make sure the mounting ball at the top of the downrod is properly seated in the mounting bracket with the rib in the mounting bracket seated in the slot in the mounting ball. See the installation guide for details.
  • Outdoor fans: If the fan stabilizer was installed, confirm proper installation. If the fan stabilizer was not installed, contact Customer Service.
This applies to these products: es6

Was This Helpful?

Yes
No

Still need help?