HAIKU OVERSTOCK SALE: 30% OFF SELECT MODELS OF HAIKU WHILE OVERSTOCK LASTS.* START SHOPPING!

My i6 fan will not start.

  • Make sure your fan is receiving power.
  • Verify supply power is adequate. Check your circuit breaker or fuse and wall switch for functionality.
  • Make sure all wires are securely connected and that the fan is properly wired and grounded.
  • Make sure the airfoils are securely tightened. On the bottom of the fan, check the tabs next to airfoil screw holes 1 and 5. The tabs should be flush with the tab openings as shown on the right. If they are not, tighten the six airfoil screws according to the numbered sequence. Repeat the tightening sequence until the tabs are flush with the openings.
This applies to these products: i6

Was This Helpful?

Yes
No

Still need help?

Call Email